Date: 08 August 2007

Table of Contents

• Introduction
• Features of the Web Interface
  • Status
  • Log
  • Filter
  • Upgrade Monitoring Card Firmware
  • Clear Counters
  • Write Settings to Flash
  • Erase Settings from Flash
  • Set Admin Password
• Features of the TFT Color Display
  • face
  • log
  • big_uc
  • net
• Appendix: Common Maintenance Procedures
  1. How do I configure the monitoring line card (10G-MONITOR)?
  2. Can I assign a static IP address to the monitoring line card (10G-MONITOR)?
  3. Can I store/save switch control settings on reboot?
  4. How do I assign/require an administrator's password for access to the web interface of the switch?
  5. I have forgotten the administrator's password for access to the web interface of the switch. How do I reset the password?
  6. How do I upgrade the firmware on the monitoring line card (10G-MONITOR)?
  7. How do I upgrade the firmware on the switch line cards?
  8. How do we tell if the switch firmware is up-to-date?
  9. Can you provide examples of how to use the SNMP interface on the switch?
  10. Can I determine the serial number of the 10G-CLOS-ENCL switch enclosure from the web interface?
  11. One of the connected switch ports is not illuminated in green/yellow.
• Glossary: Switch Traps, Counters, and State Bits

Last updated: 08 August 2007