|
Special-Order Myri-10G Products
The following Myri-10G products are available, but are in infrequent demand, so are listed separately from the products on the main Myri-10G product list. The products in this list are built to order rather than to forecast, so will typically have a longer delivery lead time than the products on the main Myri-10G product list.
Most of the following Myri-10G products have been replaced with newer and improved products on the main product list, but are still available for replacement if an exact replacement is required. When there is a newer and improved product that is similar in function, it is noted in this list.
Other of the following Myri-10G products are in infrequent demand because they are for special applications.
Follow the links for product specifications.
Software Support for Myri-10G Network Adapters
The current software distributions for Myri-10G network adapters work either with the current series of "8B" network adapters or with the earlier series of "8A" network adapters. See the software listings in the main product list.
Network Adapters
The first of the "8A" series of Myri-10G PCI Express x8 network adapters, based on the Myricom Lanai-Z8E chip, started shipping in early 2006. Starting in October 2008, many of these "8A" network adapters have been replaced on the main product list by corresponding "8B" network adapters, based on the Lanai-Z8ES chip. The "8B" network adapters are lower power than the "8A" network adapters, and operate at a 21.5% higher internal clock rate. Also, many of the "8B" network adapters are available as RoHS-compliant lead-free (RoHS-6) rather than RoHS-compliant under the server exemption (RoHS-5).
PCI-Express x8 Network Adapter with one SFP+ network port
| Description |
Software
bundle |
Product
Code |
Low-profile PCI-Express add-in card,
standard PCI faceplate |
Ethernet |
10G-PCIE-8A-S+E |
| MX |
10G-PCIE-8A-S+MX1 |
Low-profile PCI-Express add-in card,
low-profile PCI faceplate |
Ethernet |
10G-PCIE-8AL-S+E |
| MX |
10G-PCIE-8AL-S+MX1 |
| Recommended only for replacements. The 10G-PCIE-8B-S is an improved version of the 10G-PCIE-8A-S network adapters above. |
Express Module Network Adapter with one XFP transceiver network port for 10GBase-SR or 10GBase-LR
| Description |
Software
bundle |
Product
Code |
| Express Module form factor |
Ethernet |
10G-PCIE-8AE-R+E |
| MX |
10G-PCIE-8AE-R+MX1 |
| The 10G-PCIE-8AE-R Express Module network adapters are produced for special applications. |
PCI-Express x8 network adapters with one 10GBase-CX4 network port
| Description |
Software
bundle |
Product
Code |
Low-profile PCI-Express add-in card,
standard PCI faceplate,
standard CX4 connector |
Ethernet |
10G-PCIE-8A-C+E |
| MX |
10G-PCIE-8A-C+MX1 |
Low-profile PCI-Express add-in card,
low-profile PCI faceplate,
standard CX4 connector |
Ethernet |
10G-PCIE-8AL-C+E |
| MX |
10G-PCIE-8AL-C+MX1 |
| Recommended only for replacements. The 10G-PCIE-8B-C is an improved version of the 10G-PCIE-8A-C network adapters above. |
Low-profile PCI-Express add-in card,
standard PCI faceplate,
jackscrew type CX4 connector |
Ethernet |
10G-PCIE-8A-CJ+E |
| MX |
10G-PCIE-8A-CJ+MX1 |
Low-profile PCI-Express add-in card,
low-profile PCI faceplate,
jackscrew type CX4 connector |
Ethernet |
10G-PCIE-8AL-CJ+E |
| MX |
10G-PCIE-8AL-CJ+MX1 |
| These 10G-PCIE-8A-CJ network adapters are produced for a special application. |
Low-profile PCI-Express x8 network adapters with two 10GBase-CX4 network ports for failover
| Description |
Software
bundle |
Product
Code |
Low-profile PCI-Express add-in card,
low-profile PCI faceplate |
Ethernet |
10G-PCIE-8BL-2C+E |
| MX |
10G-PCIE-8BL-2C+MX1 |
| This low-profile (half-height) PCI Express add-in card is not fully compliant with the PCI Express Card Electromechanical Specifications. The lower CX4 connector intrudes into a "keep-out area" of the circuit board and may interfere mechanically with motherboard components in some hosts. Thus, this Network Adapter is a special-order product that should be used only for applications in which a low-profile card is required, and in which it has been determined that there is no mechanical interference in the host. If a low-profile card is not required, the standard-height 10G-PCIE-8B-2C Network Adapter with a standard PCI faceplate should be used. |
Low-profile "Gen 2" (5 GT/s) PCI-Express x8 network adapters
with two 10GBase-CX4 network ports for performance and failover
| Description |
Software
bundle |
Product
Code |
Low-profile PCI-Express add-in card,
low-profile PCI faceplate |
Ethernet |
10G-PCIE2-8B2L-2C+E |
| MX |
10G-PCIE2-8B2L-2C+MX1 |
| This low-profile (half-height) PCI Express add-in card is not fully compliant with the PCI Express Card Electromechanical Specifications. The lower CX4 connector intrudes into a "keep-out area" of the circuit board and may interfere mechanically with motherboard components in some hosts. Thus, this Network Adapter is a special-order product that should be used only for applications in which a low-profile card is required, and in which it has been determined that there is no mechanical interference in the host. If a low-profile card is not required, the standard-height 10G-PCIE2-8B2-2C Network Adapter with a standard PCI faceplate should be used. |
PCI-Express x8 network adapters with one QSFP network port
One-port PCI-Express x8 High-Speed Expansion Card (HSEC) for the IBM BladeCenter H
| Description |
Software
bundle |
Product
Code |
| One-port HSEC for the IBM BladeCenter H |
Ethernet |
10G-PCIE-8A-I+E |
| MX |
10G-PCIE-8A-I+MX1 |
| Recommended only for replacements. The 10G-PCIE-8B-2I and 10G-PCIE-8B2-4I HSECs are improved versions of the 10G-PCIE-8A-I HSEC above. |
|
