LC-Connectorized Duplex 50/125 Multimode Fiber Cables for 10GBase-SR (850nm XFP or SFP+) serial links
| Cable Length |
Product Code |
Quote Quantity |
| 1m |
10G-SR-1M |
|
| 3m |
10G-SR-3M |
|
| 5m |
10G-SR-5M |
|
| 10m |
10G-SR-10M |
|
| 25m |
10G-SR-25M |
|
| 50m |
10G-SR-50M |
|
| Loopback test device |
10G-SR-LOOPBACK |
|
|
These are industry-standard fiber cables that may alternatively be purchased from other sources. The 10GBase-SR cables supplied by Myricom have an orange jacket, and are the same fiber cables used for Myrinet-2000 fiber links.
|
SFP+-terminated Passive Copper "Direct Attach" Cables to connect between SFP+ ports
| Cable Length (type) |
Product Code |
Quote Quantity |
| 1m (twinax, 32AWG) |
10G-SFPDA-1M |
|
| 3m (twinax, 28AWG) |
10G-SFPDA-3M |
|
| 5m (twinax, 24AWG) |
10G-SFPDA-5M |
|
| 7m (twinax, 24AWG) |
10G-SFPDA-7M |
|
|
For cable lengths up to 7m, these copper cables are a lower cost alternative to using SFP+ transceivers and optical-fiber cables.
|
10GBase-CX4 Cables with CX4 connectors on both ends
| Description |
Product Codes |
Quote Quantity |
| 1m, 30AWG |
10G-CX4-1M |
|
| 2m, 30AWG |
10G-CX4-2M |
|
| 3m, 30AWG |
10G-CX4-3M |
|
| 5m, 30AWG |
10G-CX4-5M |
|
| 7m, 28AWG |
10G-CX4-7M |
|
| 10m, 26AWG |
10G-CX4-10M |
|
| 15m, 26AWG |
10G-CX4-15M |
|
| Loopback test device |
10G-CX4-LOOPBACK |
|
|
These cables are used typically for connections between "-C" network adapters and CX4 ports of 10-Gigabit Ethernet switches. These are industry-standard cables that may alternatively be purchased from other sources. The 10GBase-CX4 cables supplied by Myricom have a light blue jacket.
|
|
Note: 10G-CX4CXM-xM and 10G-CXM-xM 10GBase-CX4 cables for connections to "-M" ports on Myri-10G Switches are in the special-order product list.
|
QSFP-terminated Passive Copper Cables to connect between QP ports
| Cable Length (type) |
Product Code |
Quote Quantity |
| 1m (30AWG) |
10G-QC-1M |
|
| 2m (30AWG) |
10G-QC-2M |
|
| 3m (30AWG) |
10G-QC-3M |
|
| 5m (26AWG) |
10G-QC-5M |
|
|
For cable lengths up to 5m, these copper cables are a lower cost alternative to the EOE cables listed below.
|
QSFP-terminated Ribbon-fiber Electrical-Optical-Electrical (EOE) Cables to connect between QP ports
| Cable Length |
Product Code |
Quote Quantity |
| 3m |
10G-QP-3M |
|
| 5m |
10G-QP-5M |
|
| 10m |
10G-QP-10M |
|
| 15m |
10G-QP-15M |
|
| 20m |
10G-QP-20M |
|
| 25m |
10G-QP-25M |
|
|
For cable lengths longer than 5m, these are the preferred cables for HPC clusters and for switch-to-switch connections in Myri-10G switch networks with more than 512 host ports. Lengths longer than 25m are available on special order. These cables are Riser Rated (OFNR). Plenum Rated (OFNP) cables are available at additional cost on special order.
|
|
